|
>> contents |
|
AFIM-1,AFIM-2 Residual Current Device
|

AFIM-1 2P |
AFIM-1 Residual Current Device
1. Application The Residual Current Device AFIM-1 is in conformity with the standard of IEC61008.It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk line. Thus it is suitable to avoid the shock hazard and fire caused by earth leakage. PFIM RCD is mainly suitable for using in varieties of plants, enterprises, buildings, constructions, commerce, guesthouses and families. It can be used in circuits of 1 phase 230V and 3 phases 400V 50/60Hz.
2. Specification
| Number of Poles |
2P, 4P |
| Rated Current (A) |
16, 20, 25, 40, 50, 63 |
| Rated Residual Operating Current (IΔn)(mA) |
30, 100, 300, 500 |
| Rated Residual Non-operation Current (IΔno)(mA) |
≤0.5IΔn |
| Rated Voltage (V) |
AC 230/400 |
| Residual Current Off-time |
≤ 0.1S |
| Short Circuit Capacity (Icu) |
3000A |
| Endurance(times) |
≥ 4000 |
| Protection Degree |
IP20 |
3. Overall And Mounting Dimension (Unit: mm)
AFIM-2 Residual Current Device 1. Application The Residual Current Device AFIM-2 is in conformity with the standard of IEC61008.It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk line. Thus it is suitable to avoid the shock hazard and fire caused by earth leakage.PFIM RCD is mainly suitable for using in varieties of plants, enterprises, buildings, constructions, commerce, guesthouses and families. It can be used in circuits of 1 phase 230V and 3 phases 400V 50/60Hz.
2. Specification
| Number of Poles |
2P, 4P |
| Rated Current (A) |
16, 20, 25, 40, 50, 63 |
| Rated Residual Operating Current (IΔn)(mA) |
30, 100, 300, 500 |
| Rated Residual Non-operation Current (IΔno)(mA) |
≤0.5IΔn |
| Rated Voltage (V) |
AC 230/400 |
| Residual Current Off-time |
≤ 0.1S |
| Short Circuit Capacity (Icu) |
3000A |
| Endurance(times) |
≥ 4000 |
| Protection Degree |
IP20 |
3. Overall And Mounting Dimension (Unit: mm)
|

AFIM-1 4P |

AFIM-2 2P |

AFIM-2 4P |
|