>> contents
| Products - Circuit Breaker - AM1 Series Moulded Case Circuit Breaker |
| AM1 Series Moulded Case Circuit Breaker |
|||||
| According to user's demands,accessories could lead to direct wire outcoming or line wiring terminals could be added(please mark out in case of making order). |
|||||
 Under voltage release |
· Under-voltage release Wring diagram of the under-voltage module connected externally (the internal accessories in the dotted frame) Ue: AC50Hz 230V,400V
When the operation voltage is 35%~70% of the rated voltage, the under-voltage release should make the breaker trip correctly. When the operation voltage is 85%~110% of the rated voltage, the under-voltage release should make the breaker close. In case of the operation voltage less than 35% of the rated voltage, the under-voltage should prevent the breaker from closing. Note: Only the under-voltage release should be energized in advanced, the breaker could be recramped and turned-on, otherwise the breaker will be damaged. |
||||
 Shunt release |
· Shunt release Scheme of wiring(the internal accessories in the dotted frame) "K?is the slow motion switch normal-close contact connect the coil in series in the shunt release. It turns-on or turns-off voluntarily as soon as the breaker on or off.
Voltage rating: AC50Hz 230V or 400V, DC 110V 220V The shunt release should make the breaker trip reliably when the operation voltage is 70%~110% of the rated control voltage. |
||||
 Alarm contact |
· Alarm contact
|
||||
First Pre << 1 2 3 4 5 >> Next Last |
Arc Welder & Cutter Circuit Breaker Contactor Indicator Meter Power Supply Relay Starter Switch Transformer Other |
|