Intelligent Circuit Breaker,Intelligent Circuit Breaker Manufacturer,Intelligent Circuit Breaker Supplier in China--Andeli Group Co., Ltd.

>> contents

Products - Circuit Breaker - AW45 Intelligent Circuit Breaker

AW45 Intelligent Circuit Breaker

AW45-2000

1. Application
   AW45 series intelligent circuit breaker (hereinafter referred to as breaker) is suitable for the circuit of AC 50Hz with rated voltage 400V, 690V and rated current up to 6300A .It is mainly used to distribute electric energy and protect circuit and power supply equipment from overload, un-der-voltage short-circuit ,and single-phase earthing .With intelligent and selective protection functions, the breaker can improve the reliability of power supply, and avoid unnecessary power failure . The breaker is applicable for power stations, factories , mines(for 690V) and modern high-building, especially for the distribution system of intelligent building.
   The breaker conforms to IEC60947-2. The whole series have past CCC certification and CE certification.

2. Environment conditions for operation
   Temperature condition: -5°C~+40°C; the average value within 24h not exceed +35°C.
   Elevation: altitude of installation place shall not exceed 2000m.
   Atmosphere condition: relative humidity at +40°Cshall not exceed 50%. Higher humidity is permissible at lower temperature condition. When the higher monthly average relative humidity is 90% in the humiddest month , the lowest monthly average temperature of this month is +25°C. And consider the influence of dew on product surface due to temperature changes.
   Pollution grade: gradeIII.
   The breaker should be installed according to the requirement on the instruction manual: the vertical inclination degree shall not exceed 5°.

3. Specification

Type			AW45-2000	AW45-3200	AW45-4000	AW45-6300
Frame rated current Inm (A)			2000	3200	4000	6300
Number of poles			3,4	3,4	3,4	3,4
Rated current In (A)			630,800,1000, 1250,1600,2000	2000,2500, 3200	2000,2500, 3200,4000	4000,5000, 6300
Icu (kA)		400V	80	100	100	120
		690V	50	65	65	80
Ics = Icw (kA)		400V	50	80	80	100
		690V	40	50	50	65
Rated current at N-pole In (A)			50%In,100%In
Inherent making & breaking time			23-32ms
Operational performance (operations)	Electric life		500
	Mechanical life		Maintenance-free2500 Maintenance 10000
Mounting mode			Fixed withdrawable
Arcing distance(mm)			0
Intelligent controller			Standard type(M) telecommunication type (H)

AW45-3200

AW45-6300

First Pre << 1 2 3 4 5 6 7 >> Next Last

Arc Welder & Cutter

Circuit Breaker

Contactor

Indicator

Meter

Power Supply

Relay

Starter

Switch

Transformer

Other

Feedback 　　　　　>>