>> contents
Products - Contactor - CJ19 Contactors for Power Factor Correction
 
 CJ19 Contactors for Power Factor Correction
CJ19-25~32C
CJ19-25~32C		 1. Application
CJ19 series changeover capacitor contactor is mainly applicable to a power line of AC 50Hz or 60Hz, rated working voltage up to 380V. It is used to put a low voltage parallel connected capacitor in operation or switch it off in a low voltage reactive power compensation device. The contactor is equipped with a surge suppressor, which can effectively reduce the surge current passing through the capacitor at weitching on and suppress the over-voltage at switching off. The product is in conformity with the standards IEC947-4-1.

2. Specification
Electrical lfie CJ19-25C CJ19-32C CJ19-43C CJ19-63C CJ19-95C
Rating current le (380V)A 100 100 29 100 100
Power of controlled capacitor 220/230V 17 23 10 43 63
380/400V 6 9 20 15 22
Rating insulation voltage(V) 12 18 500 30 40
Rating operational voltage(V) 380
Restrained surge capacity 20le
Operation range Pick-up:(85%~110%); Drop-out:(20%~75%) Us
Coil power(VA) Start-up 70 110 110 200 200
Holding 8 11 11 20 20
Control capacity of auxiliary contact AC-15 360VA; DC-13 33W
Weight(Kg) 0.44 0.63 0.64 1.4 1.5

3. Outline and Mounting Dimension
CJ19-63~95C
CJ19-63~95C
Type Amax Bmax Cmax Dmax E F Note
CJ19-25C 80 47 124 76 34/35 50/60 Screw mount/ 35mm rail mount
CJ19-32C 90 58 134 86 40 48
CJ19-43C 90 58 136 86 40 48
CJ19-63C 132 79 150
CJ19-95C 135 87 158



Arc Welder & Cutter

Circuit Breaker

Contactor

Indicator

Meter

Power Supply

Relay

Starter

Switch

Transformer

Other
 
　　　　　>>
Copyright © 2008 Andeli Group Co., Ltd. All rights reserved.
Electric