DZ30LE-32 Residual Current Operated Circuit Breaker With Over-current Protection,Residual Current Operated Circuit Breaker With Over-current Protection Manufacturer,Residual Current Operated Circuit Breaker With Over-current Protection Supplier in China--Andeli Group Co., Ltd.

>> contents

Products - Circuit Breaker - DZ30LE-32 Residual Current Operated Circuit Breaker With Over-current Protection

DZ30LE-32 Residual Current Operated Circuit Breaker With Over-current Protection

DZ30LE-32

1. Application
DZ30LE-32 is used in the single phase circuit of AC 50Hz/60Hz, rated voltage 230V, used as electron shock protection. It can protect circuit form overload and short circuit. This product has advantages of small volume, high breaking capacity, live and zero wire are cut off at the same time, also protecting person from electric shock when the live wire connected opposite. It conforms with the standards of IEC61009.

2. Main Technical Parameter

Type	DZ30LE-32
Pole	1P+N
Rated current (A)	6,10,16,20,25,32
Rated voltage(V)	230
Rated residual action current IΔn(A)	0.03
Rated residual non-action current IΔno(A)	0.015
Rated residual making/breaking capacity IΔm(A)	500
Type of instantaneous release	C
Rated making/breaking capacity Im(A)	4500

3. Applicable conducting wire

Rated current(A)	Norminal cross section of wire mm²
In ≤6	1
6<In ≤ 13	1.5
13<In ≤ 20	2.5
20<In ≤ 25	4
25<In ≤ 32	6

4. Residual current breaking time

5. The over-current protection property

Ambient Temperature	Initial Status	Test Current	Expected Result	Expected Result	Note
30?°C	Cold position	1.13In	t ≥ 1h	Non-release	?
	Carried out immediately after previous test	1.45In	t<1h	Release	?
	Cold position	2.55In	1s<t<60s	Release	Current smoothly rises to specified value within 5s
-5~+40°C	Cold position	5In	t ≥ 0.1s	Non-release	Type C
-5~+40°C	Cold position	10In	t<0.1s	Release	Type C

6. Dimension

DZ30LE-32

Arc Welder & Cutter

Circuit Breaker

Contactor

Indicator

Meter

Power Supply

Relay

Starter

Switch

Transformer

Other

Feedback 　　　　　>>