DZL7 Residual Current Circuit Breaker,DZL7N Residual Current Circuit Breaker,Residual Current Circuit Breaker Manufacturer,Residual Current Circuit Breaker Supplier in China--Andeli Group Co., Ltd.

>> contents

Products - Circuit Breaker - DZL7,DZL7N Residual Current Circuit Breaker

DZL7 2P

DZL7 Residual Current Circuit Breaker
   1. Application
    DZL7 residual current device is in conformity with the standards of IEC61008. It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk line. Thus it is suitable to avoid the shock hazard and fire caused by earth leakage. It can be used in circuits up to single phase 240V,threephase 415V, 50 or 60Hz.
   2. Main Technical Parameter

Type	DZL7
Pole	2P,4P
Rated current In(A)	25,40,63,80,100
Rated residual operating current (IΔnA)	10,30,100,300,500
Rated non-operating current for earth leakage IΔn(A)	0.5IΔn
Voltage Un(V)	240(220) 415(380)
Residual current off-time:	Y0.1s
Minimum value of rated making and breaking capacity	1KA
Rated conditional short-circuit current (Inc)	In=25,40A Inc=1500A In=63A Inc=3000A

3. Dimension

DZL7N Residual Current Circuit Breaker
   1. Application
      DZL7N residual current device is in conformity with the standards of IEC61008. It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk line. Thus it is suitable to avoid the shock hazard and fire caused by earth leakage. It can be used in circuits up to single phase 240V,threephase 415V, 50 or 60Hz.
   2. Main Technical Parameter

3. Dimension

DZL7 4P

DZL7N 2P

Arc Welder & Cutter

Circuit Breaker

Contactor

Indicator

Meter

Power Supply

Relay

Starter

Switch

Transformer

Other

Feedback 　　　　　>>